All duties & taxes included
Colour
Need a custom size or finish?Request a quote
Need it sooner?Check expedited options
Regal Chain Chandelier — tiered amber glass, stepped square form
At 91 cm / 36 inches across and 46 cm / 18 inches tall, the Regal Chain steps down in tiered rows of textured amber glass tiles — each tile hand-set into a gold-finished frame and held aloft by four gold chains. Light from sockets behind the upper tiers passes through the irregular surface of each tile, throwing a warm honey glow with subtle ripple patterns onto the table and ceiling. The square stepped form references Art Deco proportions, scaled for an 8-person dining table or a formal entryway with a 9–11 ft ceiling. The amber colorway works against cream walls, dark wood, or polished marble surfaces.
Ships in a custom wooden crate via freight (curbside delivery). Hardwired into a junction box and installed by a licensed electrician — typically a two-person job for safe handling of the glass tiles.
Each glass piece individually fitted to a gold frame.
Tiered Art Deco silhouette, four-chain suspension.
Textured glass scatters light with ripple patterns.
| Dimensions | W 91 cm × H 46 cm / W 36″ × H 18″ |
| Form | Stepped square tiers, four-chain suspension |
| Frame | Gold-finished metal |
| Glass | Hand-cast amber piastre tiles |
| Light source | Small candelabra base — bulb not included |
| Voltage | AC 110–240 V |
| Wiring | Hardwired · 30 cm chain (extendable on request) |
| Control | Wall switch · Dimmable with dimmable LEDs + Triac dimmer |
| Mounting | Ceiling, single hardwired junction box |
| Environment | Indoor only |
| Shipping | LTL freight (custom crate) |
| Certification | North America · EU · Australia · Saudi Arabia |
Best with 9–11 ft ceilings above an 8-person dining table; the 30 cm chain places the fixture about 76 cm below the canopy. Extended chain available on request, and aim for 75–85 cm between the lowest tile and the tabletop.
Ships LTL freight in a custom wooden crate (curbside delivery). Hardwired into a junction box and installed by a licensed electrician — typically a two-person job for safe handling of the glass tiles, 2–3 hours.
The amber tone and stepped form are consistent across pieces, but each glass tile is hand-cast — surface ripples, slight color variations, and tile placement differ from piece to piece. This is part of the artisanal finish, not a defect.
Bulbs are not included — small candelabra base, use warm white LED. Dimming requires both dimmable bulbs and a Triac wall dimmer; the standard wall switch operates on/off only.
Free shipping on all orders
The time period for you to receive your goods is divided into processing time and delivery time.(US,CA)
Processing Time: 0-7 working days
Shipping Time: 6-12 working days（Size less than 36 inches）
Note:
1.For large items, if the package size is more than 39 inches (100 cm), we will use sea freight and the shipping time is 35-45 days. We hope you can understand.
2.If your project is urgent, you can contact customer service to expedite your order for an additional fee.
You can refer to Shipping Policy for details.
30 Days Free Return and Exchange
If your new Valley lamps product doesn't fit, we will gladly accept returns or exchanges within 30 days of order delivery.
Note: If the return is not due to a manufacturer’s defect, the customer will be required to ship the product back to us at their own expense, and our shipping costs will also be deducted from the refund. We’ll deduct a 20% restocking fee.
Certified Electrician Installation Required
For Safety & Compliance with NEC 2023 & UL Standards
Why Professional Installation is Mandatory:
Prevents electrical fires (NFPA reports 44,880 home electrical fires annually)
Ensures compliance with National Electrical Code (NEC) Article 410
Maintains UL listing and manufacturer warranty
Meets local building permit requirements
Licensed Electrician Installation Process:
Pre-Installation Verification
Confirms 120V/277V circuit compatibility
Checks AFCI/GFCI protection as required (NEC 210.12)
Validates junction box rating (NEC 314.27)
Verifies load capacity (NEC 220.14(B))
Safe Installation Protocol
Locks out circuit at breaker panel (OSHA 1910.333)
Tests for dead circuit (NFPA 70E compliance)
Uses UL-listed connectors (wire nuts, Wagos)
Implements proper grounding (NEC 250.110)
Final Inspection & Certification:
Performs polarity check
Verifies secure mechanical mounting
Tests dimmer compatibility (if applicable)
Provides installation documentation
Consumer Advisory (Per CPSC Guidelines):
⚠️ Risk of:
Electrocution (120V can be lethal)
Fire from improper connections
Structural damage from falling fixtures
Voided warranty (most manufacturers require professional installation)
For Your Protection:
✓ Use only licensed electricians (verify license # with local building department)
✓ Request copy of installer's liability insurance
✓ Keep installation certificate for warranty claims
We provide customized services because we have professional suppliers.If you don't find the chandelier you're looking for on our website, no matter whether it is related to size, colorand even style, feel free to reach out to us support@valleylamps.com or check About Us and we are always here to help.
Customization
Customize Color & size
If you find a specific design of chandelier in our websit that you like, but you only need a different size or color.
You can simply send us a message content As follows:
⦁ Which product – you send us the product chain is best .
⦁ You specify base size, color.
Customize personalized products
If you do not find a specific design of chandelier in our websit that you like, but you need to do is provide pictures or design drawing .
You can simply send us a message. content As follows:
⦁ You send us photos or drawings of the lamps.
⦁ You specify base size, color and material.
Ready to customize a unique chandelier just for you?
Diameter ½–⅔ of the table; hang the bottom 30–36″ above the tabletop.
Center it in the room; keep the bottom at least 7 ft off the floor.
For 2-story spaces use a 13–16 ft fixture; bottom visible mid-window, 7 ft+ above the landing.
Center over the bed or room; keep 7 ft+ clearance. Bedside pendants hang ~30″ above the table.
Hang pendants 30–36″ above the counter, spaced 24–30″ apart and centered on the island.
Ceiling fixtures need 8 ft+ clearance (per code); vanity sconces sit at 60–65″ from the floor.
Bulbs included
Light bulbs are included for easy setup and no extra cost.
Free Shipping
Enjoy free shipping on all orders for a more budget-friendly experience.
2-Year Free Warranty
Comes with a two-year free warranty for peace of mind with your purchase.
30-day returns
Hassle returns within 30 days if you're not completely satisfied.
Adjustable hanging height
Features adjustable hanging height to perfectly fit your space.
UL Electrical Certification
UL certified for safety and reliability, ensuring a worry-free experience.
Sloped Ceiling Compatible
Designed for sloped ceilings, allowing flexible installation in any setting.
Easy Assembly
Simple assembly process with no special tools required, making setup a breeze.
If you are an architect, designer or developer, take advantage of a trade program that gives you an unparalleled opportunity to purchase Valley Lamps products at discounted prices.Valley Lamps is pleased to offer more affordable discounts and better service to our trade partners.Our trade partner program is open to interior designers, interior decorators, architects as well as real estate agents, developers and other professionals.Feel free to join us!Please contact us for more information.
